Settings and diagnostics
The Settings page, at the bottom of the sidebar, has these sections:
- Mixer: the connection, the installer, and the Processing switch, which turns all RC2FX processing off or on.
- Versions: the app, RC2FX mixer software and RØDE firmware versions, whether an update is available, and the app's update actions: Download update and Restart to update on Windows, macOS and the AppImage (Check again when a downloaded update couldn't be checked), and Download, which opens the release page, for builds from source. See Versions and updates.
- About: licenses.
- Presets and Files: see Presets and settings files.
- Appearance: the app's colors. These affect only the app.
- Mixer display: screen conversion.
- Diagnostics: telemetry, events and diagnostics files.
- Developer: the Developer mode switch, which shows developer controls such as SSH access for the connected mixer. Turning it off only hides them: it doesn't remove access. See Working on a mixer.
Screen conversion
The RØDECaster's touchscreen is mounted sideways, so each redraw has to be rotated before it is shown. The display hardware normally does this, and it shares memory bandwidth with the audio. On a busy mixer, particularly with noise suppression on, a large redraw can delay the audio enough to cause an xrun.
Screen conversion moves some of the rotation to the processor:
- Screen hardware (default): the display hardware rotates every redraw, as in stock firmware.
- Balanced: for large redraws, the processor rotates part of the image and the display hardware rotates the rest.
- CPU for large redraws: the processor rotates large redraws. Small updates stay on the display hardware.
All three produce the same image. The setting is saved with your other settings and takes effect within a second, without a restart. Keep the default unless you see xruns that coincide with screen activity.
Screen conversion requires a Pro II on firmware 1.7.7. On 1.7.6 the screen always uses the stock behaviour.
Diagnostics
Settings › Diagnostics › Open has three tools.
Events opens a window listing what the mixer has recorded, newest first. This includes xruns (audio cycles that finished late), stalled or late background work, missed noise-suppression deadlines, and dropped audio. Each event has a time, a channel and a short explanation. Details shows its measurements, and the chips at the top filter by event type.
Show telemetry adds a live view with:
- the audio engine's state, routing and timing
- each processed channel's input and output levels, added delay, and compressor or limiter gain reduction
- counters for clipping, suppression fallbacks to the unprocessed audio, and dropped audio
A counter is highlighted once it is non-zero. Hover over a warning for an explanation.
Reset diagnostics… in the telemetry view clears the counters and the event list after you confirm.
A few xruns while the mixer starts up or changes USB mode are normal. Regular xruns during normal use are worth reporting.
Export diagnostics… saves a file with the mixer's state and recent timing history. Attach it when reporting a problem. It contains no audio.